Start with the meter
Cleveland Water suggests a quick test before you call anyone. Turn off every tap and appliance in the house, find the water meter, and look at the test wheel on its face. If the wheel keeps turning with no water in use, there is a leak somewhere between the meter and the fixtures.
That simple check tells you whether you have a leak, and it tells you something about size. A slowly creeping wheel suggests a drip, while a fast one points to a pipe that is open.
Common hidden leaks
Cleveland Water says a running toilet can waste 200 gallons or more a day. Add dye to the tank and wait 15 to 30 minutes without flushing. Color in the bowl means a leaking flapper.
Slow drips from angle stops and braided lines can run for months behind cabinet doors.
A small weep at a fitting dries before you see it, and corrodes the fitting from outside.
The pipe from the street to the meter can leak underground without any sign inside the house.
How we find a leak without opening walls
We start with the meter test and a pressure check on the supply side. Acoustic listening devices, thermal imaging and moisture meters then narrow down the location. The goal is to open the smallest possible area to reach the pipe.
If the leak is under a slab, we explain the options. A pinhole in a copper line may be repaired in place, while a pattern of leaks often points to repiping as the longer-term answer.
Active leak or water through the ceiling: emergency steps
Shut off the main water valve. Open a faucet at the lowest point to drain remaining pressure, move belongings away from the wet area and turn off power to wet areas only from a dry spot.
Call (440) 468-0237. Dispatch answers 24/7, and a same-day visit is offered when the schedule allows.
Call (440) 468-0237 nowA leak that was found late: the bill and the repair
Cleveland Water says customers who repair an undetected underground leak may receive up to 50 percent off excess consumption for one billing cycle by submitting a Plumbing Repair Statement. Ask the utility about the current process, and keep the plumber's paperwork. We document what we found and what we repaired.
Cleveland Water also notes that it repairs leaks between the street main and the curb stop. The customer is responsible for the service line from there, which includes the stretch from the tree lawn to the meter.
If the leak turns out to be a failed tank, water heater repair covers it. If it is under a fixture, our faucet repair and toilet repair pages explain the fixes.
Write down the meter reading before and after a two-hour period when no one uses water. Give both numbers to the plumber. That simple record narrows the search.
Near Clague Road, our Clague Park area page walks through the same meter and dye tests step by step.
Meter spinning with everything off? Call and describe what you see.
Call (440) 468-0237Sources
Meter test, toilet dye test and bill adjustment details are from Cleveland Water's own guidance. Confirm current terms with the utility.
Frequently asked questions
Check the meter with all water off. A moving test wheel means a leak. A sudden rise in your water bill or damp spots on walls and ceilings are other signs.
Yes. Dispatch answers 24/7. An active leak is treated as urgent, and you will be told how to stop the water until a plumber arrives.
Often yes. We use listening and thermal tools to pinpoint the location before any cutting, and we explain repair or reroute options.
Not usually. We narrow the location first and open only the area needed to reach the pipe.
Cleveland Water describes a partial adjustment for repaired undetected underground leaks. Ask the utility for the current rules and keep your repair paperwork.

